Both front and rear turn signals dont work. I redid bike fairings and all and was finishing putting together when went to wire back turn signals and smelled burning so shut off bike. I konw i wired it wrong but took bike for run after wards (unhooking turn signal wires) and just wanted to make sure it didnt fry computer. Runs great just no turn signals. Would this be due to fuse blew or relay fried? Hopefully thats all... any advice would be appreciated. New at this and trying to save money but looks like costing me. Any help is appreciated. Thanks.
SOURCE: I'm installing a new rear tail light with turn
use a light pen that you can get from auto parts store to find the hot wires for l and r sides
SOURCE: 1994 fzr 500 rear barke light and turn signals not
Your relay is bad. It is right next to the fuse block.
i hope this helps you
-matthew
SOURCE: I went to hook up my new tail light on my 2006
the cover of the fuse box usually tells what they are for, I would expect more than 2 fuses so could be another fuse box
247 views
Usually answered in minutes!
I appreciate the advice but the headlights work, brake lights work, even the turn signal lights are on but wont flash? any ideas
One last question: if you turn on the left turn signal, the left lights come on but don't flash? Same with the right? (Ok, two questions!) If that's the case, it sounds like the flasher unit got fried. I'm not sure where it's placed exactly on your bike, but that's where I'd start. Hope this helps.
That's what it sounds like to me. Hopefully nice and easy to get to.
×