20 Most Recent Samsung ML-1640 Monochrome Laser Printer Questions & Answers

You have software to reset ml 1640 printer, you can use refill toner.

www.nakshatraworld.com

1640printer samsang orange light and no print

ML-1640 Series + Toner exhausted.+ how to reset the printer.

I dont really understand the question as when you insert a replacement toner it will inform the printer a new toner has been inserted, however if you are refering to Hardware reseting the page count please find a diagram here http://www.arbikas.com/forum/Attachments/ML1640_reset.pdf

The thermistor is part of the fuser assembly. Sometimes when the paper jams or is too thick it "burns" the thermistor out

you are filling hp or canon laser printer toner poly bag. It is not this same toner. I have original SAMSUNG,LEXMARK,XEROX toner poly bag
My Email is [email protected]

You have to check with your toner suppliers, they have chips for toners and drums, nothing in software you can do to get around the chips on a Samsung.

my samsung ml-1666 printer problem is while i'm push the power on button the printer LED (RED & Green) lite a second and goes off.what couse this problem.....

try the ml-2510 drivers there were no win 98/ me drivers for the 1640.

http://www.samsung.com/za/support/detail/supportPrdDetail.do?menu=SP00&prd_mdl_cd=ML-1640%2FXFA&prd_mdl_name=ML-1640&prd_ia_sub_class_cd=P

download here and run the file in administrator

call @Coimbatore- 9843035235 printer service, instant repair Help over the phone..9843035235 @ Coimbatore Tamil Nadu

we have samsung ml1640 refil solutions.
easy to reset after reset pritner counter.

www.chipresetters.com

Regards
Jayendra
msn:[email protected]
www.chipresetters.com

Replace chip or
Reset Printer using reset software (permanent solution)
[email protected]

need for samsung ml 1666 chipre set software

I got the same problem. It seems they did not develop specific drivers for win98se. However, I found that you can print using the drivers for the old Samsung ML-2510. Win98se drivers for that printer can still be downloaded from Samsung website. I've been using the 2510 drivers with the 1640 printer for a couple of months, and worked fine so far. It seems very little change in electronics from the 2510 to the 1640 model.
You need also Virtual Printer Port for USB from microsoft.

You can replace toner for that printer only with genuine Samsung toner because refilled toners are not working.

I had the same problem when a paper jammed and I have pulled it out. The red light came on and nothing worked. My solution was: I pulled out the tonner and put it back, opened all covers and closed it. All this apparently must be done with printed turned on (the same thing with printer turned off didn't work). Hope this helps.

Mindaugas

samsung ml1640 laser red and green light blinking continuously and printing not happening