Dishwashers - Recent Questions, Troubleshooting & Support
Karcher Puzzi 100 Spray pressure low
1. CHECK THE WATER SUPPLY: MAKE SURE THE WATER SUPPLY IS ADEQUATE AND NOT BLOCKED.
2. CLEAN THE NOZZLES: CHECK THE NOZZLES FOR ANY BLOCKAGES OR DEBRIS AND CLEAN THEM THOROUGHLY.
3. ADJUST THE PRESSURE SETTINGS: ENSURE THAT THE PRESSURE SETTINGS ON THE MACHINE ARE CORRECTLY ADJUSTED.
4. CHECK THE HOSES: INSPECT THE HOSES FOR ANY KINKS OR BLOCKAGES THAT MAY BE RESTRICTING THE WATER FLOW.
5. CONTACT CUSTOMER SUPPORT: IF THE ISSUE PERSISTS, CONTACT KARCHER CUSTOMER SUPPORT FOR FURTHER ASSISTANCE.
3/28/2024 10:15:14 AM •
Dishwashers
•
Answered
Yesterday
I have a Miele G562 dishwasher and when it finishes the program, it restarts again?
1. MAKE SURE THE DOOR IS FULLY CLOSED: CHECK IF THE DOOR IS FIRMLY SHUT AFTER THE PROGRAM FINISHES.
2. RESET THE DISHWASHER: TURN OFF THE POWER TO THE DISHWASHER FOR A FEW MINUTES, THEN TURN IT BACK ON TO RESET THE SYSTEM.
3. CHECK THE PROGRAM SETTINGS: ENSURE THAT THE PROGRAM SELECTED IS CORRECT AND NOT SET TO REPEAT.
4. CONTACT MIELE CUSTOMER SUPPORT: IF THE ISSUE PERSISTS, REACH OUT TO MIELE CUSTOMER SERVICE FOR FURTHER ASSISTANCE.
3/28/2024 10:13:46 AM •
Miele...
•
Answered
Yesterday
DIO3T131FEUK Integrated dishwasher has power but won't switch on
1. CHECK IF THE POWER CORD IS PROPERLY PLUGGED IN AND THE POWER SUPPLY IS WORKING.
2. MAKE SURE THE DOOR OF THE DISHWASHER IS FULLY CLOSED AND LATCHED.
3. CHECK THE CONTROL PANEL FOR ANY ERROR CODES OR INDICATORS.
4. TRY RESETING THE DISHWASHER BY TURNING OFF THE POWER SUPPLY FOR A FEW MINUTES AND THEN TURNING IT BACK ON.
5. IF NONE OF THE ABOVE WORK, THERE MIGHT BE A FAULTY CONTROL BOARD OR WIRING ISSUE THAT NEEDS TO BE ADDRESSED BY A PROFESSIONAL TECHNICIAN.
3/28/2024 10:12:54 AM •
Dishwashers
•
Answered
Yesterday
WINTERHALTER MODEL MTR3 GIVE ME ERROR 22.2 AND ERROR 12.1
ERROR 22.2:
- CHECK THE WATER INLET VALVE FOR ANY BLOCKAGES OR DAMAGE
- ENSURE THE WATER PRESSURE IS ADEQUATE
- VERIFY THE WATER INLET SOLENOID IS FUNCTIONING PROPERLY
ERROR 12.1:
- INSPECT THE DRAINAGE SYSTEM FOR ANY OBSTRUCTIONS
- MAKE SURE THE DRAIN HOSE IS NOT KINKED OR CLOGGED
- CHECK THE DRAIN PUMP FOR ANY MALFUNCTIO
3/28/2024 10:11:51 AM •
Dishwashers
•
Answered
Yesterday
What is the benefits for Choosing Stainless Steel?
Stainless steel manufacturers like Jindal Steel Ltd produce a variety of different designer and utility based railings which help add a touch of elegance to your interiors. But when it comes to handrails, there are many varieties one could choose ranging from Oakwood to ply etc. Then, why should one opt for stainless steel?
There are so many benefits one can hope to achieve out of installing the many different kinds of stainless steel handrails and other products that manufacturers have on offer:
- Affordability
- Ease of maintenance
- Aesthetic quality
- Durability
- Variety of designs
They work very well for all architectural types and blend in with their clean lines adding a touch of modernity. For detailed info visit
Stainless Steel Products
I have a Danby countertop dishwasher, DDW611WLED it started leaking and I saw that the bottom seal was pretty much disintegrated. Can't find
the bittom seal anywhere.
Don't Worry. Google is your friend...
Google Search your Make & Model number & Add service manual, service manual.pdf download, ,service manual parts list, Schematic , or just parts List.
Google will bring up a vast amount of information & most of it not what you are looking for BUT If you adhere your search specifically for the information you require, It Should bring up what you are looking for as well as Outlets & phone number you can call to check for such parts.
Don't be afraid to Be a little cheeky over the telephone & Ask (if they can't help) if they can recommend an outlet that could help.. OH and have they got that particular number too ;)
3/15/2024 11:30:06 AM •
Danby...
•
Answered
on Mar 15, 2024
What year is this Kenmore dishwasher Model # 665.15831791 made?
The date of manufacture is determined by the SERIAL NUMBER on the appliance. This dishwasher was manufactured by Whirlpool. The following link explains how to determine when it was manufactured:
http://www.fixya.com/support/r3576437-determining_the_age_of_your_whirlpool_ap
The serial number is usually located somewhere around the door opening. The first two numbers in the serial number identify the WEEK it was manufactured (52 weeks in a year). The second DIGIT in the serial represents the YEAR it was manufactured.
If you have difficulty determining the manufacture date, please post back with your serial number and I will assist you. I hope you find this information helpful.
3/12/2024 6:43:46 PM •
Dishwashers
•
Answered
on Mar 12, 2024
Not finding what you are looking for?