Office Equipment & Supplies - Popular Questions, Answers, Tips & Manuals
Why my Trifo Emma not powering/starting after press button Reset? The robot vacuum is dead.
Some times this is just the charging dock not communicating with the actual robot vacuum. What surface is the charging dock sitting on? It works best if it is on a hard surface and Not carpet.
Try this. Remove the vacuum from the charging dock and turn it completely Off. Unplug the charging dock from the wall outlet. Check inside the charging dock at the connection point the robot plugs into. Make sure it's clean. Next check the robot itself to make sure the connector on that is also clean.
Everything needs to be completely turned off for at least 5 minutes. This does a 'Soft Reset' on the Robot's electronics. After 5 minutes fit the robot back into the charging dock, gently but firmly making sure it is all the way in place. Next plug the charging dock back into the wall outlet. DON'T turn the robot back on. Walk away from it for an hour to let the charging dock put some charge into the battery in the robot. After that hour turn the robot back on and see if the issue has changed.
3/12/2024 10:17:21 AM •
The Office...
•
32 views • 0 helpful votes
How do these points equate to money?
No money ever!
There is no payment made for answers on Fixya, points don't mean prizes, they are just for fun.
ADMIN Andrew
- Answers: 65,820 and not a penny per Answer.
Head over to
www.justanswer.com they pay lots of money because they charge for people to ask a question.
..
HI! toshiba copier shows error code of C3B0. what is the solution?
That depends on the printers model
One could be;
Check to see if the waste bottle is overfull.
If yes, the waste toner will be backed up into the waste tubes, first affecting the primary transfer cleaner unit, then the black drum cleaning unit, then the color drum cleaning units.
Or;
Developer unit • Check if the developer unit is installed properly. • Check that the developer unit and coupling on the equipment side are properly engaged. • Check that the mixer of the developer unit is rotated. • Check if the developer material is too dark visually. • Check if the amount of the developer material is too large or too small. • Remove any toner or dust on the ATC sensor connector and the drawer connector of the process cover. • Remove any toner or dust on the EPU sensor connector and the drawer connector on the equipment side.
Or;
Auto toner sensor Harness LGC board • Check the connectors and harnesses between the auto toner sensor and LGC board (CN364). • Check if there is any foreign matter such as toner in the connector of the auto toner sensor. Remove if there is and reconnect it.
My oce plotter 340 is error 22552
Error codes on Oce plotters, including the Oce Plotter 340, can indicate various issues. Unfortunately, I don't have specific information about error code "22552" for the Oce Plotter 340, as error codes can be specific to the manufacturer and model.
To troubleshoot the issue, you may want to consult the user manual or technical documentation for your Oce Plotter 340. The manual should provide information on error codes and possible solutions. If you don't have a physical copy of the manual, you might be able to find it on the manufacturer's website or by contacting their customer support.
In general, error codes on plotters can be caused by issues such as paper jams, communication problems, hardware malfunctions, or software errors. If the issue persists and you cannot find a solution in the documentation, it may be advisable to contact Oce's customer support or seek assistance from a professional technician who specializes in Oce plotters. They may be able to diagnose and resolve the specific problem you're facing.check;
2/28/2024 6:50:59 AM •
OCE Office...
•
27 views • 0 helpful votes
Not finding what you are looking for?