Recent Questions, Troubleshooting Help & Support - Page 7
DIO3T131FEUK Integrated dishwasher has power but won't switch on
1. CHECK IF THE POWER CORD IS PROPERLY PLUGGED IN AND THE POWER SUPPLY IS WORKING.
2. MAKE SURE THE DOOR OF THE DISHWASHER IS FULLY CLOSED AND LATCHED.
3. CHECK THE CONTROL PANEL FOR ANY ERROR CODES OR INDICATORS.
4. TRY RESETING THE DISHWASHER BY TURNING OFF THE POWER SUPPLY FOR A FEW MINUTES AND THEN TURNING IT BACK ON.
5. IF NONE OF THE ABOVE WORK, THERE MIGHT BE A FAULTY CONTROL BOARD OR WIRING ISSUE THAT NEEDS TO BE ADDRESSED BY A PROFESSIONAL TECHNICIAN.
3/28/2024 10:12:54 AM •
Dishwashers
•
Answered
Yesterday
WINTERHALTER MODEL MTR3 GIVE ME ERROR 22.2 AND ERROR 12.1
ERROR 22.2:
- CHECK THE WATER INLET VALVE FOR ANY BLOCKAGES OR DAMAGE
- ENSURE THE WATER PRESSURE IS ADEQUATE
- VERIFY THE WATER INLET SOLENOID IS FUNCTIONING PROPERLY
ERROR 12.1:
- INSPECT THE DRAINAGE SYSTEM FOR ANY OBSTRUCTIONS
- MAKE SURE THE DRAIN HOSE IS NOT KINKED OR CLOGGED
- CHECK THE DRAIN PUMP FOR ANY MALFUNCTIO
3/28/2024 10:11:51 AM •
Dishwashers
•
Answered
Yesterday
Hi,
LG model: L12042
the air conditioner
Hi,
There is no knob to turn for this model of air conditioner to adjust the thermostat. You can use the remote to choose three cooling settings. Just lower down the temp and that should adjust the thermostat. Choose the maximum cooling settings and see if it makes any changes.
If not, turn off the air-conditioner completely and cut the power from the line. Drain the flea power from the unit by pressing down the power button for at least 3-5 seconds while it is off. Restore main line power and turn the unit on. Try to hear if there is a "kick" from the compressor. You should be hearing a "humming" sound that verifies that the compressor is running and Freon is circulating. If you don't notice any sound from the compressor, then we might be facing a big problem. If you do, then most probably that you just have what we call a "low charge" which means that there is leak of freon on your unit and that needs to be repaired.
Hope this helps.
Anynunpaid insurance policies?
1. FIND AN INSURANCE POLICY THAT YOU HAVEN'T PAID.
2. IGNORE ANY REMINDERS OR COLLECTION CALLS.
3. WAIT FOR THE INSURANCE COMPANY TO GIVE UP ON COLLECTING.
4. ENJOY YOUR FREE INSURANCE COVERAGE WITHOUT PAYING A DIME!
My USB won't stay on so I can charge devices on it how to fix pls
1. FIRST, UNPLUG ANY DEVICES CONNECTED TO THE USB PORT.
2. GRAB A SMALL BRUSH OR COMPRESSED AIR CANISTER AND CLEAN OUT THE PORT TO REMOVE ANY DUST OR DEBRIS.
3. CHECK THE USB CABLE FOR ANY DAMAGE OR WEAR AND TEAR. IF IT'S DAMAGED, REPLACE IT.
4. RESTART YOUR DEVICE TO SEE IF THAT HELPS RESET THE USB PORT.
5. IF THE ISSUE PERSISTS, TRY UPDATING YOUR DEVICE'S DRIVERS OR SOFTWARE.
6. IF ALL ELSE FAILS, CONSIDER GETTING THE USB PORT REPAIRED OR REPLACED.
Spraying problems on f25
1. CHECK THE SPRAY NOZZLES: MAKE SURE THEY AREN'T CLOGGED OR DIRTY. CLEAN THEM THOROUGHLY WITH A CLEANING SOLUTION.
2. ADJUST THE SPRAY PRESSURE: IF THE SPRAY IS TOO WEAK OR TOO STRONG, ADJUST THE PRESSURE ACCORDINGLY.
3. USE THE RIGHT SPRAYING TECHNIQUE: ENSURE YOU'RE HOLDING THE SPRAYER AT THE CORRECT ANGLE AND DISTANCE FROM THE SURFACE.
4. CHECK THE SPRAYING CONDITIONS: MAKE SURE YOU'RE SPRAYING IN IDEAL WEATHER CONDITIONS, AVOIDING WINDY OR RAINY DAYS.
5. CONSIDER USING A DIFFERENT SPRAYING METHOD: IF THE PROBLEM PERSISTS, TRY A DIFFERENT SPRAYER OR TECHNIQU
Wants to die when i increase the revs Robin ec10 engine
Ingredients:
- Wrench
- Screwdriver
- Replacement parts (if needed)
Instructions:
1. Locate the carburetor on your Robin EC10 engine.
2. Use the wrench to loosen the screws holding the carburetor in place.
3. Once the carburetor is loose, use the screwdriver to adjust the throttle screw to increase the revs.
4. Tighten everything back up and start the engine to test the increased revs.
Congratulations! You've now potentially put yourself in harm's way by increasing the revs on your engine. Enjoy the danger responsibly
Olympus Sport exercise bike, model OS-11202. Resistance braking (gear/level change) is not working.
1. CHECK THE RESISTANCE KNOB: MAKE SURE IT'S NOT STUCK OR DAMAGED. TRY TURNING IT TO SEE IF IT ADJUSTS THE RESISTANCE.
2. INSPECT THE RESISTANCE MOTOR: SOMETIMES THE MOTOR THAT CONTROLS THE RESISTANCE MAY BE MALFUNCTIONING. CHECK FOR ANY SIGNS OF DAMAGE OR WEAR.
3. RESET THE BIKE: TURN OFF THE BIKE, UNPLUG IT, WAIT FOR A FEW MINUTES, THEN PLUG IT BACK IN. THIS MAY RESET THE SYSTEM AND FIX THE ISSUE.
4. CONTACT CUSTOMER SUPPORT: IF NONE OF THE ABOVE STEPS WORK, IT'S BEST TO CONTACT OLYMPUS SPORT CUSTOMER SUPPORT FOR FURTHER ASSISTANCE.
Changed batteries for kettler coach LS but still the display doesnt work
- Check the battery placement: Ensure that the batteries are inserted correctly with the correct polarity (+/-) aligned. Double-check that the battery contacts are clean and free from any corrosion or dirt. If there is any corrosion, clean the contacts using a cotton swab and a mild cleaning solution.
- Test the batteries: Even if you recently replaced the batteries, it's possible that the new batteries are defective or discharged. Try testing the batteries with a battery tester or use them in another device to verify their functionality. If they are found to be faulty, replace them with new, fully charged batteries.
- Reset the display: Some rowing machines have a reset function that can help resolve display issues. Look for a reset button or procedure in the user manual for your Kettler Coach LS. Follow the instructions provided to reset the display unit. This can often resolve minor glitches and restore proper functionality.
- Check the connections: Inspect the connections between the display unit and the rowing machine. Ensure that all cables and connectors are securely plugged in and not loose or damaged. If there are any loose connections, reattach them firmly. If you notice any damaged cables or connectors, they may need to be repaired or replaced.
- Contact Kettler customer support: If the above steps do not resolve the issue, it is recommended to contact Kettler customer support directly. Provide them with the specific details of the problem, including the model number and any troubleshooting steps you have already taken. They should be able to provide further assistance or arrange for repair or replacement if necessary.
Screws of fitbit charge HR not coming out using a replacement band screwdiver kit
- Verify the compatibility: Ensure that the replacement band screwdriver kit you are using is specifically designed for the Fitbit Charge HR. Different devices may have varying screw sizes or types, so it's important to use the correct tool for your specific Fitbit model.
- Apply proper pressure and technique: When using the screwdriver, make sure you are applying sufficient downward pressure while turning it counterclockwise (lefty-loosey) to loosen the screws. Use a steady and firm grip, but be cautious not to apply excessive force that could potentially damage the screws or the device.
- Check the screwdriver tip: Ensure that the screwdriver tip is appropriately sized and fits securely into the screw head. If the tip is too small or too large, it may not engage properly, making it difficult to loosen the screws. Try using a different screwdriver tip from your kit or consider obtaining a compatible screwdriver specifically designed for the Fitbit Charge HR.
- Apply lubricant (if necessary): If the screws are stuck or resistant, you can try applying a small amount of lubricant, such as WD-40 or a light machine oil, to the screw threads. This can help loosen any corrosion or debris that might be hindering the screw's movement. Allow the lubricant to penetrate for a few minutes before attempting to unscrew again.
My precor 100I AMT elliptical keeps resetting when you slow down. Anybody know what's causing this?
steps you can try:
- Power source: Ensure that the elliptical is properly connected to a stable power source. Check the power cord and make sure it is securely plugged into a working outlet. Examine the cord for any signs of damage or fraying.
- Console battery: The console of the elliptical may have a backup battery that helps retain settings and data during a power interruption. If this battery is low or depleted, it can cause the console to reset. Consult the user manual to locate the battery compartment and check the battery's condition. Replace it if necessary.
- Loose connections: Examine the cables and connections between the console and other components of the elliptical. Ensure they are securely plugged in and not loose or damaged. Loose connections can cause intermittent power disruptions and lead to resetting issues.
- Overloading the machine: If you are exceeding the maximum weight or load capacity specified for the elliptical, it can strain the components and cause the system to reset. Check the user manual or manufacturer's guidelines for the recommended weight limit and ensure it is not being exceeded.
- Faulty console or control board: If the above steps do not resolve the issue, there may be a problem with the console or control board of the elliptical. This could be due to a malfunctioning component or a software glitch. In such cases, it is recommended to contact Precor customer support or consult a professional technician for further assistance. They will have the expertise to diagnose and address the specific issue with your elliptical's console.
1992 Sequoia Skier. Where does the personal performance monitor contact attach to the underside?
The 1992 Sequoia Skier, manufactured by NordicTrack, features a personal performance monitor that attaches to the underside of the ski machine. While I don't have access to specific diagrams or instructions for this particular model, I can provide general guidance on where the personal performance monitor may be attached.
Typically, the personal performance monitor on ski machines attaches to a designated mounting point or bracket located on the underside of the main frame. The exact location may vary depending on the specific design of the machine.
To locate the attachment point for the personal performance monitor on your 1992 Sequoia Skier, I recommend the following steps:
- Inspect the main frame: Examine the underside of the main frame and look for any pre-drilled holes, slots, or brackets specifically designed to accommodate the personal performance monitor. These attachment points are typically located near the front or center of the machine.
- Check the user manual: Consult the original user manual or assembly instructions for the 1992 Sequoia Skier. The manual may provide specific details or diagrams illustrating the attachment process and the location of the personal performance monitor.
- Contact NordicTrack customer support: If you're unable to locate the attachment point or find the necessary information, it is recommended to reach out to NordicTrack customer support directly. They can provide you with accurate, model-specific guidance on where the personal performance monitor attaches to the underside of the 1992 Sequoia Skier.
Machine not running but lights coming on ok. There was a noise before this happened. Would it be the motor
To further troubleshoot and confirm if the motor is indeed the issue, you can try the following steps:
- Power off and unplug the machine: Turn off the machine and unplug it from the power source to ensure your safety while performing any inspection or maintenance.
- Check for visible damage: Carefully inspect the motor for any visible signs of damage, such as loose wires, broken parts, or burnt or melted components. If you notice any visible issues, it may indicate a motor problem.
- Test the motor with a multimeter: If you have access to a multimeter, you can test the motor's electrical continuity and resistance. This can help determine if the motor is functioning properly or if there are any electrical issues.
- Listen for abnormal sounds: While the machine is unplugged, manually rotate the elliptical pedals or try to move the flywheel. Listen for any unusual or grinding sounds that could indicate a motor problem.
- Contact NordicTrack customer support: If you are unable to pinpoint the issue or if the motor appears to be faulty, it is recommended to contact NordicTrack customer support or consult a professional technician. They can provide guidance, diagnose the problem accurately, and assist you with repair or replacement options.
Nordic Track 1300 commercial elliptical. Why can't I level up the resistance?
If you are unable to increase the resistance on your NordicTrack 1300 Commercial elliptical, there could be a few possible reasons for this issue:
- Incorrect operation: Ensure that you are following the correct procedure to adjust the resistance. Refer to the user manual or instructions provided by NordicTrack to ensure you are using the correct buttons or controls to increase the resistance. Sometimes, there may be specific steps or requirements for adjusting the resistance level.
- Mechanical issue: There might be a mechanical problem with the resistance mechanism. Check if the adjustment knob or lever is functioning properly and not stuck or damaged. Inspect the cables or belts connected to the resistance system to ensure they are intact and properly connected.
- Electronic issue: The resistance adjustment on some ellipticals is electronically controlled. If the console or control panel is not working correctly, it may affect your ability to adjust the resistance. Check if any error messages are displayed on the console or if there are any other issues with the electronic components.
- Calibration required: In some cases, the elliptical may need to be calibrated to ensure the resistance levels are accurate. Consult the user manual for instructions on how to calibrate the elliptical or contact NordicTrack customer support for guidance.
- Malfunctioning parts: There could be a malfunction or failure of specific components related to the resistance system, such as the resistance motor or sensors. If you have ruled out other possible causes, it may be necessary to have a professional technician inspect and repair the elliptical.
I want to unlock the Tetris game on my SGH-C300 but I need an unlocking code. What should I do?
- Contact your phone carrier: Reach out to your phone carrier or service provider and inquire about the possibility of unlocking your phone. They may provide you with an unlocking code or guide you through the process.
- Search for unlocking services: Look for reputable phone unlocking services online. There are various websites and third-party services that specialize in providing unlocking codes for different phone models. Ensure you choose a reliable and trusted service to avoid any potential scams.
- Check with a phone repair shop: Visit a local phone repair shop or mobile service center and inquire if they offer phone unlocking services. They may be able to assist you in unlocking your SGH-C300 and provide you with the necessary code.
Not finding what you are looking for?