Recent Questions, Troubleshooting Help & Support
My rev. Lights on my 2002 buick rendezvous are not working.all other lights ,wiper,s brakes,and defrost work,but no rev lights?
This seems to to be an issue with some Buicks. I don't think Buick have a specific fuse for the back up lights and the 2005 to 2007 Rendezvous models had a relay for those lights.
OK. Start with the simple and silly stuff first. Check the bulbs and the sockets they fit into. It could be a blown bulb or there is dirt and corrosion on the contacts blocking the electrical current to the bulb. Using a multimeter set to DC volts test the bulb socket for power to the bulb. With the Park brake ON, the Ignition ON and the Engine OFF selecting reverse should turn the back up lights on to test for power.
If no power to the light fitting next move to the switch on the Transmission the shifter operates when you select reverse. I'm not sure where it is on the Rendezvous Transmission, You might get lucky and it'll be screwed into the housing next to the actual shifter.
Remove password bios toshiba portege m400 please!
Here is a guide toremove windows passwordwith Windows Password Recovery Tool Professional from http://www.windowspasswordsrecovery.com/Step1: Download and install Windows Password Recovery Tool.Step2: Burn CD/DVD/USB Flash Drive. (Namely it is to burn a Windows password reset disk.)Step3: Set the target computer boot from CD/DVD or USB.Step4:
Remove the forgotten Windows passwordwith the burned CD/DVD/USB. Then log on to Windows without a password.Of course, you can also finish
Windows password remover if you have a password reset disk in advance. That's also an easy solution.
Source: http://www.windowspasswordsrecovery.com/windows-password-remover.htm
Where do I find the engine number on a 2014 Rav4
In a 2014 Toyota RAV4, you can typically find the engine number stamped on the engine itself. Here's where you can commonly locate it:
- Engine Block: The engine number is often stamped or engraved on the engine block. You may need to look around the engine block, typically on the front or sides, near the cylinder head or the engine mount.
- Owner's Manual: Sometimes, the engine number is recorded in the vehicle's owner's manual or maintenance booklet. Check these documents to see if the engine number is listed.
- Vehicle Registration Documents: In some regions, the engine number may be recorded on the vehicle registration documents or title. Check these documents for the engine number if it has been previously documented.
- Under the Hood: Occasionally, manufacturers may place a sticker under the hood that contains information about the vehicle, including the engine number. Look around the engine compartment for any stickers or labels that may display the engine number.
If you're having trouble locating the engine number, consult the owner's manual or contact a Toyota dealership for assistance. They can provide guidance on where to find the engine number specific to your vehicle.
Torque settings for bolts between engine and gearbox
The torque settings for bolts between the engine and gearbox can vary depending on the specific make and model of the vehicle. Additionally, different vehicles may have different torque specifications for these bolts based on factors such as the engine size, transmission type, and other considerations.
Without knowing the exact make, model, and year of your vehicle, it's challenging to provide precise torque settings. However, as a general guideline, these bolts typically require a high level of torque due to the significant forces and stresses they must endure.
For most vehicles, the torque specifications for these bolts are typically provided in the vehicle's service manual. If you don't have access to the manual, you can often find torque specifications by searching online using your vehicle's make, model, and year, along with specific keywords like "engine to gearbox bolt torque."
If you're unable to find the torque specifications through these methods, it's highly recommended to consult a certified mechanic or contact the vehicle manufacturer directly for accurate torque settings. Using the correct torque specifications is crucial to ensure the bolts are tightened to the appropriate level and to prevent damage or failure.
Where is the thermostat located on 2000 Chevy venture Warner brother edition
Here's a general guide to locating and replacing the thermostat in a Chevy Venture:
- Locate the Thermostat Housing: Follow the upper radiator hose from the radiator to the engine. The hose connects to the thermostat housing, which is usually secured to the engine with bolts or screws.
- Drain Coolant (if necessary): Before replacing the thermostat, it's advisable to drain some coolant from the system to prevent spills. Place a drain pan beneath the radiator drain valve and open it to allow coolant to drain.
- Remove the Thermostat Housing: Once the coolant is drained, use a wrench or socket set to remove the bolts or screws securing the thermostat housing to the engine. Carefully lift off the housing to access the thermostat.
- Replace the Thermostat: Note the orientation of the old thermostat before removing it. Remove the old thermostat and replace it with a new one of the same type and temperature rating. Ensure the new thermostat is installed correctly, with the spring side facing into the engine.
- Clean and Inspect: Before reassembling, clean the mating surfaces of the thermostat housing and engine block. Inspect the gasket or O-ring for damage and replace if necessary.
- Reassemble: Place the thermostat housing back onto the engine and secure it with the bolts or screws. Tighten them evenly to ensure a proper seal. Reconnect the upper radiator hose.
- Refill Coolant: Refill the cooling system with the appropriate type and amount of coolant. Bleed any air from the system according to the manufacturer's recommendations.
- Check for Leaks: Start the engine and allow it to reach operating temperature while monitoring for leaks around the thermostat housing. If any leaks are detected, shut off the engine and tighten the housing bolts as needed.
- Test Drive: Take the vehicle for a short test drive to ensure that the engine operates at the correct temperature and that the thermostat functions properly.
It's important to consult the vehicle's service manual or a trusted automotive resource for specific instructions and torque specifications when replacing the thermostat.
Why do samsung tab 10.1 when i put the sim card it goes out
- SIM Card Tray Issue: The SIM card tray might be damaged or not properly aligned. Ensure that you are inserting the SIM card into the tray correctly and that the tray is properly seated in the device.
- Incompatible SIM Card: The SIM card you're trying to use might not be compatible with the Samsung Tab 10.1. Ensure that you're using a SIM card that is supported by your device and is of the correct size (micro-SIM or nano-SIM).
- Dirty or Faulty SIM Card Contacts: Dust, dirt, or debris on the SIM card or SIM card tray contacts can prevent proper connectivity and cause the SIM card to eject. Clean the SIM card and the tray contacts with a soft cloth and reinsert the SIM card.
- SIM Card Slot Issue: There could be an issue with the SIM card slot itself. Inspect the slot for any physical damage or debris that may be causing the SIM card to eject. If you notice any damage, you may need to have the device repaired by a professional.
- Software Issue: Sometimes, software glitches or conflicts can cause the SIM card to eject unexpectedly. Try restarting your Samsung Tab 10.1 or performing a factory reset to see if the issue persists.
If none of the above steps resolve the issue and the SIM card continues to eject, it may indicate a hardware problem with your device. In this case, you may need to contact Samsung customer support or visit a certified repair center for further assistance.
Not finding what you are looking for?